Open your device and go to “Settings”.Make sure Bluetooth® is on. Click “Accessibility”.On the “Accessibility” screen, choose “Hearing Devices”. Turn your hearing aid(s) off and then on again and place them close to your device. The hearing aid stays in pairing mode for three minutes. Your device will detect the hearing aid for pairing. Detected hearing aids will appear in your iPhone list.Choose your hearing aid.Confirm pairing. If you have two hearing aids, pairing confirmation is needed for each hearing aid. When you turn off your hearing aids on your iPhone they will no longer be connected. To connect them again, turn on your hearing aid(s). The hearing aid(s) will then automatically reconnect to your device.Clear a pairing. Sometimes an old device may still be paired, or sometimes clearing your current devices and re-pairing will solve the problem. In this case, from the “Hearing Devices” screen, if a device is already listed but will not connect, choose that device and then select “Forget this device”. Then, restart your hearing aids to start the pairing process as described above.